BJRSV - CHEVRON SRI GREASE NLGI 2

Product Identification

Product ID:CHEVRON SRI GREASE NLGI 2
MSDS Date:11/28/1991
FSC:9150
NIIN:01-235-5057
MSDS Number: BJRSV

Responsible Party
CHEVRON ENVIRONMENTAL HEALTH CENTER INC.
15299 SAN PABLO AVE.
RICHMOND, CA 94804-0054
US

Emergency Phone: 415-233-3737

Info Phone: 415-233-3737

Preparer: NONE

Cage: 0AHD1

Contractor
CHEVRON ENVIRONMENTAL HEALTH CENTER INC
4054 RICHMOND, CA 94804 US

Telephone: 800-582-3835

Cage: 0AHD1

Ingredients

DISTILLATES, HYDROTREATED HEAVY PARAFFINIC

CAS: 64742-54-7

RTECS: PY8035500

Fraction By Weight: >85.0%

OSHA PEL 5 MG/M3 MIST

ACGIH TLV: 5 MG/M3 MIST 9394


ADDITIVES

Fraction By Weight: <15.0%

Hazards

LD50 LC50 Mixture:ORAL LD50 (RATS) > 5.0 G/KG
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOT EXPECTED TO CAUSE PROLONGED OR
SIGNIFICANT EYE OR SKIN IRRITATION. IF ABSORBED THROUGH THE SKIN,
SUBSTANCE CONSIDERED ONO-TOXIC. ACCIDENTAL HIGH-VELOCITY INJECTION
UNDER THE SKIN COULD RESULT IN S ERIOUS INJURY. NOT HAZARDOUS BY
INHALATION OR INGESTION. MAY CAUSE SKIN DISCOLORATION.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:ACCIDENTAL HIGH VELOCITY INJECTION UNDER THE
SKIN MAY RESULT IN SERIOUS INJURY. THE INITIAL WOUND AT THE
INJECTION SITE MAY NOT APPEAR TO BE SERIOUS AT FIRST, BUT IF LEFT
UNTREATED, COULD RESULT IN DI SFIGUREMENT OR AMPUTATION OF THE
AFFECTED PART. MAY CAUSE SKIN DISCOLORATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: AS A PRECAUTION FLUSH WITH WATER FOR 15 MINUTES. REMOVE
CONTACT LENSES. SKIN: AS A PRECAUTION, WASH WITH SOAP AND WATER. IF
INJECTED, SEEK IMMEDIATE MEDICAL ATTENTION. INGESTION: GIVE WATER
OR M ILK TO DRINK. CONSULT MEDICAL PERSONNELBEFORE INDUCING
VOMITING.

Fire Fighting

Flash Point:>500F,>260C
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER FOG
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND
FULL FACE-PIECE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.

Accidental Release

Spill Release Procedures:STOP LEAK AT SOURCE. CONTAIN LIQUID. CLEAN UP
AS SOON AS POSSIBLE USING ABSORBENT MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT WELD, HEAT OR DRILL CONTAINER.
REPLACE CAP OR BUNG. EMPTIED CONTAINERS STILL CONTAIN HAZARDOUS
MATERIAL WHICH MAY IGNITE IF HEATED SUFFICIENTLY
Other Precautions:DO NOT USE PRESSURE TO EMPTY DRUM OR EXPLOSION MAY
RESULT.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:NORMAL
Protective Gloves:NO SPECIAL PROTECTION REQUIRED
Eye Protection:NO SPECIAL PROTECTION REQUIRED
Other Protective Equipment:SKIN CONTACT CAN BE MINIMIZED BY WEARING
PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
NOTE TO PHYSICIAN: HIGH PRESSURE INJECTION UNDER THE SKIN MAY RESULT IN
A SMALL, SOMETIMES BLOODLESS, PUNCTURE WOUND. WITHIN 24 HOURS,
THERE IS USUALLY A GREAT DEAL OF SWELLIN, DISCOLORATION AND INTEN
SE THROBBING PAIN. IMMEDIATE TREATMENT AT A SURGICAL EMERGENCY
CENTER IS RECOMMENDED.

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:< 1
Vapor Density:NOT GIVEN
Spec Gravity:0.92
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GREEN GREASE

Stability

Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING AGENTS SUCH AS CHLORATES, NITRATES,
PEROXIDE, ETC.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON DIOXIDE, WATER VAPOR, CARBON
MONOXIDE, OXIDES OF NITROGEN.

Disposal

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.